Kamis, 25 Januari 2018

Post-Season Poinsettia Care

by Kurt M. Jones, Chaffee County Extension Director


            The holidays are behind us, but that doesn’t mean that you need to discard your poinsettias!  Poinsettias often lose their color in late winter, usually by mid-March.  When the plant has passed its stage of usefulness in March or April, remove the colorful bracts and part of the stem.  This cutting back can be done any time from March through mid-July, depending on the desirable size and shape of the plant.  Be sure to leave three or four leaves on each stem to insure sufficient photosynthesis.

           During the early summer, the plant will need to be repotted into the next larger size pot.  Use a well-drained potting soil, such as a blend of sphagnum peat moss, vermiculite and/or perlite.  Thoroughly mixing a phosphate fertilizer with the soil at the time of repotting is a common practice.

           Place the poinsettia in a bright area where the temperature will remain constant.  Water as needed to keep the soil moist to the touch, and fertilize with a complete fertilizer every two to three weeks.  During the summer, the plant can go outside provided it is partially shaded and temperatures don’t fall below 55 degrees F.   To keep the plant well-formed, trim tall growth at six-week intervals.  The last pruning should occur in late August. 
  
          Poinsettias are short-day photoperiodic plants.  This means that they set buds and produce flowers as the autumn nights lengthen, blooming naturally during November or December.  To flower and develop colored bracts, a poinsettia must receive as much sunshine as possible during the day.  Starting about October 1st, it also needs at least 14 hours of uninterrupted darkness each night at temperatures between 60 and 70 degrees F.  Stray light of any kind such as street lights, pool lights or lamps could delay or halt the reflowering process.  Keep this dark treatment until color shows in the bracts.  This normally happens near Thanksgiving, but could happen as early as two weeks before Thanksgiving.  Continue watering and fertilizing to encourage good growth.

           There are many pests that can infest poinsettias.  Insects should be washed off with a mild soap solution using a sponge or spray bottle.  Mealybugs and whiteflies may require a pesticide treatment or removal of infested plant parts.  Mealybugs can be treated using rubbing alcohol and cotton swabs.
   
         Cool, moist soil temperatures encourage root diseases.  If lower leaves start turning yellow and fall off, a root rot condition may be present.  This can be overcome by using a fungicide as a soil drench.
     
       One common misconception with poinsettias is the fear they are poisonous.  In a 1995 poll, 2 out of every 3 people held the false impression that poinsettia plants are toxic if eaten.  Research conducted at Ohio State University showed that rats fed unusually high doses of poinsettia plant parts were not adversely affected.  To equal this experiment, a 50-pound child would have to eat more than 500 poinsettia bracts.  Based on this research, the U.S. Consumer Product Safety Commission denied a 1975 petition to label poinsettias as dangerous.  Poinsettias are not edible and are not intended to be eaten.  If eaten, parts of all plants may cause varying degrees of discomfort, but usually not death.  Keep all plants out of the reach of small children.

Rabu, 17 Januari 2018

Aphids On My Honeysuckles!

Aphids On My Honeysuckles!

by Kristina Hughes, Clear Creek County Master Gardener

I’m writing this blog partly as a reminder to myself to attend to a problem I first noticed last growing season but whose best treatment is applied during the winter. Now would be a good time to deal with it.

I have several honeysuckle shrubs on my property. They are one of the few types of shrubs I can grow which don’t get savaged by the animals and don’t require extra water. I have been hugely pleased with them.

Photo by Kristina Hughes
This past summer, I noticed that the honeysuckle leaves looked odd: small, purplish and rolled length-wise, growing in tight little clusters as if the leaves had never fully expanded. From a distance the leaf clusters on the branches looked like they were covered in flecks of black and white dirt. When I looked more closely, I saw tiny white flecks and tiny green bugs, LOTS of them, all over both the outside and inside of the rolled up leaves.

I knew they were aphids because the tiny white flecks are discarded carcasses, like snake skins, which they shed as they grow bigger. And on the rear-ends of the living, green bugs there were little “tailpipes”, like two stubby tails.

Once I identified the bug as an aphid, I looked for information by googling ‘honeysuckle aphids site:.edu’. The first part of the search doesn’t require explanation. The second part, “site.edu”, may be unfamiliar. It instructs Google to limit results to websites that end in “.edu”. I like to use this search-refining tool to get straight to the university-based information which forms the basis of the Master Gardener program.

W Cranshaw, CSU, Bugwood.org
I immediately found web resources that described my problem exactly. The new growth on my honeysuckles had been attacked by a honeysuckle leaf-folding aphid, scientific name Hyadaphis tataricae. It’s also called honeysuckle witches’ broom aphid. Aphids are very common and usually don’t cause extensive damage to their host plant. They are a favorite food of many birds and predatory insects, which often keep the aphid populations at a reasonable level without human intervention. And if aphids get a little out of hand, they are easily knocked off the plant with a strong stream of water from a garden hose. Worst case scenario, one might choose to use an insecticidal soap which kills the aphids on contact. Aphids prefer sucking on new tender plant growth, so anything that stimulates new growth (such as cutting off the damaged areas) should be avoided. Pretty simple, right?

Unfortunately, I learned from a University of Wisconsin factsheet that the honeysuckle leaf-folding aphid has an adaptation which makes it more challenging to control. It sucks on the top side of emerging leaves and this causes the leaves to curl upward, thus enclosing the aphids and protecting them from the above-listed control measures. Predators can’t get to them easily because they are rolled up in their protective leaf. Strong sprays of water don’t easily dislodge them. Insecticidal sprays which kill on contact can’t reach the insects through the rolled up leaf. So these little aphids are especially tough to get rid of. Their saliva stunts the new growth of the infested plant and this can cause a decline in the vigor the plant. And several years of heavy infestation can kill the plant. I’m normally not very concerned when I find some aphids on my plants, because they are usually so easy to control, but these aphids seem to be different!

W Cranshaw, CSU, Bugwood.org
Apparently, these aphids lay eggs which overwinter on the tips of the branches and in the curled up leaves. So, one strategy for control is to trim the branches to 6” below any obvious distorted growth during winter and remove any leaves. Horticultural oil is also recommended to control leaf-curling aphids. Horticultural oil is applied during the dormant season (winter) before bud break, but when the temperature is above 40F. These are the steps I am reminding myself to do soon.

Another strategy is to watch carefully for bud break in the spring and spray contact insecticides on the new growth before the aphids cause the leaves to curl up. So I’ll have to set another reminder for that step.

I am glad I noticed the problem and then found information that seems to match the issues, so I can take targeted, effective steps to solve it. I really value my honeysuckles, especially since I have limited choice of plants which can thrive on my property in spite of the animals and the never-dull climate here in the mountains. I think I have my work cut out for me!

Selasa, 02 Januari 2018

CARA PERAWATAN MESIN POTONG RUMPUT


Memiliki halaman rumah yang indah dengan ditumbuhi rumput hijau serta bersih merupakan dambaan bagi sebagian orang. Halaman dengan rumput yang hijau dan bersih sangat indah untuk dipandang serta dapat memberikan nuansa tenang, pikiran pun akan terasa rileks.

Akan tetapi kita pun sering terpikirkan bahwa merawat rumput sangatlah merepotkan ketika berkeinginan untuk memiliki halaman dengan rumput yang hijau serta bersih. Anda bisa memakai jasa layanan pemotong rumput, ataupun melakukannya sendiri.

Jika halaman rumah anda tidak begitu luas, anda dapat menggunakan gunting pemotong rumput, sedangkan jika halaman rumah anda lumayan luas anda dapat memakai mesin pemotong rumput. Apabila anda tidak memiliki mesin tersebut dan berencana hendak membelinya, baca lebih lanjut artikel ini yang akan memberikan tips memilih mesin potong rumput. Dalam memilih mesin potong rumput Anda harus memperhatikan 3 hal yaitu jenis mesin potong rumput, tipe pisau mesin pemotong rumput dan cara perawatannya. Berikut ulasannya untuk Anda.



Jenis Mesin Potong Rumput

Ada 2 jenis mesin pemotong rumput yaitu:

1. Pemotong Rumput Dorong

Mesin jenis ini hanya dipakai untuk halaman yang memiliki permukaan tanah rata. Pada bagian tangkai pendorong pada mesin jenis ini bisa dilipat sehingga mudah sekali ketika disimpan. Mesin jenis ini bisa memotong rumput hingga pinggir sesuai dengan jalur roda. Mesin jenis ini pun terdapat penampung rumput yang tidak sulit ketika dipasang maupun ketika melepaskannya. Apabila halaman maupun lapangan lumayan luas serta berbentuk segi empat, lebih baik pakai mesin potong rumput dorongserta ketika menggunakannya lebih baik berkeliling memutar. Hal ini bertujuan supaya rumput yang terpotong dapat terkumpul di tengah-tengah halaman, sehingga rumput yang sudah terpotong tersebut mudah dikumpulkan serta dibuang dan hendaknya ketika memotong rumput dikerjakan sewaktu siang hari saat embun telah hilang, gunanya adalah agar rumput yang sudah terpotong tersebut tidak banyak menempel di kantong penampungan pada mesin tersebut sehingga mudah untuk dibersihkan




2. Pemotong Rumput Gendong

Mesin potong rumput gendong digunakan untuk memotong rumput di lapangan maupun halaman yang permukaan tanahnya tidak rata maupun bergelombang. Bentuk mesin jenis ini hampir sama dengan alat penyemprot hama yang kerap digunakan oleh petani untuk menyemprot dan membasmi hama. Mesin jenis ini mempunyai gagang besi berukuran panjang. Cara menghidupkannya hanya dengan menarik tuas yang terletak di dekat mesin. Ketika menggunakan mesin jenis ini, sebaiknya dipakai dengan cara berjalan maju, bukan dengan cara berjalan mundur. Bila terdapat batu pada tanah, sebaiknya disingkirkan terlebih dahulu sehingga bagian pisau pemotong rumput tidak cepat rusak atau cacat.


Tipe Pisau Pada Mesin Pemotong Rumput

Ada 3 jenis pisau pada mesin potong rumput tipe gendong yaitu:
  • Pisau palang : Dipakai untuk memotong rumput berukuran besar misalnya alang-alang, rumput gajah, dan sebagainya.
  • Pisau bulat bergigi 8 : Pisau jenis bulat bergigi 8 dipakai untuk memotong semak belukar.
  • Pisau bulat bergigi 80 : Pisau jenis bulat bergigi 80 digunakan untuk memotong tumbuhan yang amat besar.




Tips Merawat Mesin Potong Rumput

1. Rutin Mengganti Oli dan Bensin

Selalu pastikan oli atau pelumas penuh sesuai dengan parameter yang ada dan jangan lupa untuk menggantinya secara berkala. Pastikan juga bensin selalu terisi sebelum menggunakannya.

2. Rajin Memanaskan Mesin

Sebelum dipakai, jangan lupa untuk memanaskan mesinnya terlebih dahulu untuk mencegah terjadinya kemacetan di tengah pemakaian. Jangan lupa juga untuk menjauhkan kabel busi dari businya terlebih, karena bisa menyebabkan mesin menyala mendadak.

3. Mengganti Saringan Udara

Mengganti saringan udara ini juga harus dilakukan secara berkala. Saringan udara yang sudah terlalu kotor dapat menghambat kerja mesin sehingga tidak maksimal.


4. Pakailah Busi yang Sesuai dengan Mesin

Suku cadang merupakan komponen utama dari sebuah mesin. Oleh karena itu, jangan sembarangan memakai suku cadang, khususnya pada busi. Gunakan busi yang sesuai, pilih yang memiliki jangka waktu pemakaian panjang, serta jangan lupa untuk membersihkannya secara rutin.

5. Perhatikan Senar Pada Mesin

Sama halnya dengan saringan udara, senar pada mesin pemotong rumput juga harus selalu diperhatikan dan diganti secara berkala.

6. Gunakan Pisau Pemotong Standar

Selalu gunakan pisau pemotong standar sesuai dengan spesifikasi. Hindari penggunaan pisau pemotong yang tidak sesuai karena akan menjadikan mesin bekerja dengan tidak maksimal.

7. Hindari Bensin yang Tercampur Air

Sebisa mungkin hindarkan air masuk ke dalam tabung bensin. Rajinlah membersihkan karburator untuk membersihkan air dan kotoran yang tertinggal.

8. Gunakan Mesin dengan Baik dan Benar

Bukan hanya perawatannya saja yang penting, pemakaian mesin juga harus diperhatikan. Gunakan mesin potong rumput dengan baik dan benar. Dan hindari kecerobohan dalam pemakaiannya. Jangan memaksa mesin untuk bekerja terus menerus karena akan menurunkan kinerja mesin. Rawat motor mesin secara berkala, setidaknya enam bulan sekali dengan membersihkan kerak yang menempel pada piston, ruang bakar, knalpot, dan sekrup mesin.

9. Jauhkan dari Jangkauan Anak-Anak

Usahakan jangan libatkan anak-anak dalam kegiatan menggunakan mesin potong rumput ini. Karena akan sangat berbahaya bagi anak-anak jika mereka dibiarkan menggunakan alat tersebut.

10. Simpan di Tempat yang Terlindung

Penyimpanan mesin juga harus diperhatikan. Jauhkan mesin dari sumber api agar tidak berpotensi terbakar.

Sumber:
http://dapurteknik.com
http://alatkebunku.com
https://news.ralali.com

Beranda pertanian masa kini